Rac-Spiu-04Ge; Table 9-15 Description Of The Indicators On The Panel Of The Rac-Spiu-02Hs Board; Table 9-16 Technical Parameters Of The Rac-Spiu-02Hs Board - Zte ZXR10 1800-2S Hardware Description

Property
Supported network
protocol
Indicators
For a description of the indicators of the RAC-SPIU-02HS board, refer to

Table 9-15 Description of the Indicators on the Panel of the RAC-SPIU-02HS Board

Indicator
RUN
LNK1/LNK2
Technical Parameters
For the technical parameters of the RAC-SPIU-02HS board, refer to

Table 9-16 Technical Parameters of the RAC-SPIU-02HS Board

Parameter
Silk screen name
Dimensions (W × H × D)
Power consumption
Weight
Rate

9.6 RAC-SPIU-04GE

Overview
An RAC-SPIU-04GE board has the following functions:
l Provides four lines of electrical interfaces for gigabit Ethernet interface cards.
l
Supports self-adaptive 10/100/1000BASE-T.
l
Supports hop swapping of boards.
l
Supports board temperature detection and board ID read.
Panel
For the panel of an RAC-SPIU-04GE board, see
SJ-20150204153047-004|2015-03-30 (R1.0)
Description
IP
Color Description
Green The indicator is lit when the board is operating properly.
The indicator is lit when the link is operating properly, and is
Green
not lit when the link is idle.
Specification
RAC-SPIU-02HS
3.86 in. × 0.79 in. × 6.9 in. (98.1 mm ×19.92 mm ×175 mm)
7 W
0.46 lb. (0.21 kg)
Multiple rates, up to 4.096 Mbps.
9-9
Chapter 9 Line Interface Boards
Table
Figure 9-6.
ZTE Proprietary and Confidential
Table 9-15.
9-16.