Compass Calibration - ProFlight Wraith PFBD104 User Manual

Compass Calibration

Before starting calibration of the Compass, ensure the drone is on a level
surface
Hold the left stick to the bottom left
and the right stick to the top right
until the lights on the drone start to
flash.
Point the front of the drone to the
ground, and then twist the drone
clockwise, turning it in a full 360
degree circle 3 times.
With the drone still on the level
surface, turn it slowly clockwise,
turning it in a full 360 degree circle 3
times.
With the drone horizontal, and the
front facing away from you, flip the
drone in a 360 degree circle 3 times.
10 of 18