Installing The Usb-To-Serial Driver (Optional) - Raritan PX3TS User Manual

3. Perform
Initial Network Configuration via CLI
USB connection:
1. A USB-to-serial driver is required in Windows
before connecting the USB cable. See
Driver (Optional)
2. Connect a USB cable between the PX3TS device's USB-B port and
a computer's USB-A port.
3. Perform
Initial Network Configuration via CLI
Note: Not all serial-to-USB converters work properly with the PX3TS so
Raritan does not introduce the use of such converters.
Direct network connection:
1. Connect one end of a standard network patch cable to the
ETHERNET port of the PX3TS.
2. Connect the other end to a computer's Ethernet port.
3. On the connected computer, launch a web browser to access the
PX3TS, using either link-local addressing: pdu.local or 169.254.x.x.
See (on page 98).
Login

Installing the USB-to-Serial Driver (Optional)

The PX3TS can emulate a USB-to-serial converter over a USB
connection. A USB-to-serial driver named "Dominion PX2 Serial
Console" is required for Microsoft
Download the USB serial console driver from the Raritan website's
(http://www.raritan.com/support/). The driver contains
Support page
the dominion-serial.inf, dominion-serial.cat and
dominion-serial-setup-<n>.exe files.
Note: <n> in the filename of "dominion-serial-setup-<n>.exe" represents
the file's version number.
There are two ways to install this driver: automatic and manual
installation. Automatic driver installation is highly recommended.
Automatic driver installation in Windows
1. Make sure the PX3TS is NOT connected to the computer via a USB
cable.
2. Run dominion-serial-setup-<n>.exe on the computer and follow
online instructions to install the driver.
Note: If any Windows security warning appears, accept it to continue
the installation.
Chapter 2: Installation and Configuration
Installing the USB-to-Serial
(on page 13).
Windows
® ®
(on page 17).
. Install this driver
®
(on page 17).
operating systems.
®
:
13