A Note About Untriggered Rules; Managing Event Logging; Viewing The Local Event Log - Raritan PX3TS User Manual

Managing Event Logging

b. Select the desired action from the list. To make multiple
selections, press Ctrl+click or Shift+click to highlight multiple
ones.
c. Click Delete.
d. Click Yes on the confirmation message.
4. Click Close to quit the dialog.

A Note about Untriggered Rules

In some cases, a measurement exceeds a threshold causing the PX3TS
to generate an alert. The measurement then returns to a value within the
threshold, but the PX3TS does not generate an alert message for the
Deassertion event. Such scenarios can occur due to the hysteresis
tracking the PX3TS uses. See
(on page 631).
Hysteresis
By default, the PX3TS captures certain system events and saves them in
a local (internal) event log.

Viewing the Local Event Log

You can view over 2000 historical events that occurred to the PX3TS
device in the local event log.
When the log size exceeds 256KB, each new entry overwrites the oldest
entry.
To display the local log:
1. Choose Maintenance > View Event Log. The Event Log dialog
appears.
Each event entry in the local log consists of:
 Date and time of the event
 Type of the event
 A description of the event
 ID number of the event
2. The dialog shows the final page by default. You can:
 Switch between different pages by doing one of the following:
- Click or
- Click or
- Type a number in the Page text box and press Enter to go to a
specific page.
Chapter 5: Using the Web Interface
"To De-assert" and Deassertion
to go to the first or final page.
to go to the prior or next page.
291