14. Optional. If you installed the rear hold−down brackets, secure the
brackets to the rear rails using two screws for each bracket (see
Figure 10).
15. If you removed the UPS battery tray in Step 2, replace the battery
tray and secure with the battery retaining brackets.
Replace the UPS front cover.
16. Continue to Installing the UPS" on page 35.
EATON Powerware
®
9135 Two−in−One UPS (5000/6000 VA) User's Guide
Figure 10. Securing the Rear Hold−Down Brackets
INSTALLATION
S
164201726 Rev 1
www.powerware.com
29