Eaton Powerware 9135 Two-in-One UPS 5000/6000 VA User Manual page 34

INSTALLATION
28
EATON Powerware
www.powerware.com
11. Optional. Install the rear hold−down brackets (included with the rail
kit) if you need to move the rack enclosure with the UPS already
rack−mounted inside (see Figure 8).
Figure 8. Installing the Rear Hold−Down Brackets
12. Slide the UPS and any optional EBMs into the rack.
13. Secure the front of the cabinet to the rack using two M6 12 mm
round−head screws on each side (see Figure 9).
Figure 9. Installing the Cabinets
® 9135 Two−in−One UPS (5000/6000 VA) User's Guide
S
164201726 Rev 1