Eaton Powerware 9135 Two-in-One UPS 5000/6000 VA User Manual page 32

INSTALLATION
26
EATON Powerware
www.powerware.com
3. Place the Powerware cabinet on a flat, stable surface with the front
of the cabinet facing you.
NOTE You can adjust the position of the mounting brackets.
4. Align the mounting brackets with the screw holes on the side of the
cabinet and secure with the supplied M4 6 mm flat−head screws.
5. If installing additional cabinets, repeat Steps 3 and 4 for each
cabinet.
Figure 6. Installing the Mounting Brackets
® 9135 Two−in−One UPS (5000/6000 VA) User's Guide
S
164201726 Rev 1