Installing The Powerware Static Switch; Installing A Fully Rated Static Switch (4000A); Installing Ssbm Or Smb Circuit Breakers; Installing An Ssbm Or Smb Circuit Breaker - Powerware 9315s Installation & Operation Manual

2.4

Installing the Powerware Static Switch

Your Switchboard System Bypass Module (SSBM) includes the Powerware static
switch shown below.
SSBM Current
Rating
2500A
3000 to 4000A
2.4.1 Installing a Fully Rated Static Switch (2500A or 4000A)
The SSBM should be shut down prior to installing the static switch.
If the SSBM cannot be shut down, transfer the SSBM to Bypass and manually
If the SSBM is supplied with a System Maintenance Bypass (SMB), transfer the
SSBM to Maintenance Bypass prior to installing the static switch.
Using an adequate lifting device, install the fully rated static switch in the same
manner as a drawout circuit breaker.

Installing SSBM or SMB Circuit Breakers

2.5
The SSBM and SMB are equipped with General Electric PowerBreakRII drawout
circuit breakers.
SSBM
Current Rating
2500A/100 kAIC
3000A/65 kAIC
3000A/100 kAIC
4000A/65 kAIC
4000A/100 kAIC
2.5.1

Installing an SSBM or SMB Circuit Breaker

NOTE: The General Electric installation instructions and user's guides noted below
are available at the GE Industrial Systems Publications Library website of
http://www.geindustrial.com/cwc/library.
Using an adequate lifting device, install the SSBM and SMB circuit breakers per
instructions in GE Document GEH---6271, Installation Instructions for PowerBreak
Circuit Breakers, Draw-Out 800 ---4000 Ampere Frames.
2--4
Static Switch
Current Rating
2500A
4000A
open the FBP breaker prior to installing the static switch.
Circuit Breaker
Current Rating
(100% Rated)
2500A/100 kAIC
3000A/65 kAIC
3000A/100 kAIC
4000A/65 kAIC
4000A/100 kAIC
Static Switch Static Switch
Type Manufacturer
Fully Rated Powerware
Fully Rated Powerware
WARNING:
Circuit Breaker
Manufacturer
General Electric
General Electric
General Electric
General Electric
General Electric
Powerware 9315 Parallel Capacity/Redundant System with PHP SSBM
Static Switch
Weight kg (lbs)
91 (200)
227 (500)
Circuit Breaker
Weight kg (lbs)
110 (242)
110 (242)
110 (242)
138 (304)
138 (304)
164201373 Rev. A
II
t
092402