Table of Contents
Advertisement
Powerware BPIII online power protection can be utilized to prevent loss of valuable
electronic information, minimize equipment downtime, and/or minimize the adverse
effect on equipment production due to unexpected power problems.
The Powerware BPIII Harsh Environment (HE) Uninterruptible Power Supply (UPS)
system continually monitors incoming electrical power and removes the surges,
spikes, sags, and other irregularities that are inherent in commercial utility power.
Working with the electrical system, the UPS supplies clean, consistent power that
sensitive electronic equipment requires for reliable operation. During brownouts,
blackouts, and other power interruptions, one or more optional battery cabinets
can provide emergency power to safeguard your operation.
The UPS will function automatically and requires very little attention during normal
operation. However, read and understand the procedures described in this manual
to ensure trouble-free operation.
This manual describes how to install and operate the Powerware BPIII HE
Uninterruptible Power Supply (UPS) system. It contains instructions for installing
and operating both the UPS and Environmental cabinets.
Each component of the Harsh Environment UPS system is housed in a
free-standing cabinet. The system configuration consists of the UPS and the
Environmental cabinets. Figure 1 shows the Powerware BPIII Harsh Environment
UPS system.
Powerware BPIII Harsh Environment UPS 50--75 kVA Installation and Operatio
164201261 Rev. F 111503
Introduction
n
1
Advertisement
Table of Contents
