Figure 9. Wiring An Rmp To The Ups - Powerware 5075 kVA Installation & Operation Manual

4.
Connect RMP wiring to the terminal block using terminations shown in Table D.
From RMP A
From RMP B (if used)
26
TB1 TB2

Figure 9. Wiring an RMP to the UPS

Table D. RMP Wire Terminations
TB1---4
TB1---5
TB1---6
TB1---7
TB1---4
TB1---5
TB1---6
TB1---7
Powerware BPIII Harsh Environment UPS 50--75 kV Installation and Operation
DB---9 CONNECTOR
(ON COMMUNICATIONS
PANEL OF THE UPS)
To UPS
TB3---1
TWISTED WIRES (4) TWISTED WIRES (4)
TB3---2
1 2 TURNS PER 1---2 TURNS PER
TB3---3
TB3---4
To UPS
TB3---5
TWISTED WIRES (4) TWISTED WIRES (4)
TB3---6
1 2 TURNS PER 1---2 TURNS PER
TB3---7
TB3---8
Remarks
3 INCHES
Remarks
3 INCHES
164291261 Rev. F 111503