Domain Name Service Commands; Ip Domain-List; Table 147: Address Table Commands - Digisol DG-FS4528P Management Manual

45

ip domain-list

D N
OMAIN AME
These commands are used to configure Domain Naming System (DNS)
services. Entries can be manually configured in the DNS domain name to IP
address mapping table, default domain names configured, or one or more
name servers specified to use for domain name to address translation.
Note that domain name services will not be enabled until at least one name
server is specified with the
enabled with the ip domain-lookup

Table 147: Address Table Commands

Command Function
ip domain-list Defines a list of default domain names for incomplete
host names
ip domain-lookup Enables DNS-based host name-to-address translation
ip domain-name Defines a default domain name for incomplete host
names
ip host Creates a static IPv4 host name-to-address mapping
ip name-server Specifies the address of one or more name servers to use
for host name-to-address translation
clear dns cache Clears all entries from the DNS cache
clear host Deletes entries from the host name-to-address table
show dns Displays the configuration for DNS services
show dns cache Displays entries in the DNS cache
show hosts Displays the static host name-to-address mapping table
This command defines a list of domain names that can be appended to
incomplete host names (i.e., host names passed from a client that are not
formatted with dotted notation). Use the no form to remove a name from
this list.
S
YNTAX
[no] ip domain-list name
name - Name of the host. Do not include the initial dot that
separates the host name from the domain name.
(Range: 1-64 characters)
D S
EFAULT ETTING
None
– 921 –
S C
ERVICE
ip name-server command and domain lookup is
command.
OMMANDS
Mode
GC
GC
GC
GC
GC
PE
PE
PE
PE
PE