Configuration Options; Panel Display; Table 5: Web Page Configuration Buttons; Figure 2: Front Panel Indicators - Digisol DG-FS4528P Management Manual

C
Configurable parameters have a dialog box or a drop-down list. Once a
ONFIGURATION
configuration change has been made on a page, be sure to click on the
O
PTIONS
Apply button to confirm the new setting. The following table summarizes
the web page configuration buttons.

Table 5: Web Page Configuration Buttons

Button
Apply
Revert
Help
N
OTE
is configured as follows: Under the menu "Tools / Internet Options /
General / Temporary Internet Files / Settings," the setting for item "Check
for newer versions of stored pages" should be "Every visit to the page."
N
OTE
the screen after making configuration changes by pressing the browser's
refresh button.
P D
The web agent displays an image of the switch's ports. The Mode can be
ANEL ISPLAY
set to display different information for the ports, including Active (i.e., up
or down), Duplex (i.e., half or full duplex), or Flow Control (i.e., with or
without flow control).

Figure 2: Front Panel Indicators

Action
Sets specified values to the system.
Cancels specified values and restores current
values prior to pressing "Apply."
Links directly to web help.
To ensure proper screen refresh, be sure that Internet Explorer 5.x
:
When using Internet Explorer 5.0, you may have to manually refresh
:
– 73 –
C 3 | Using the Web Interface
HAPTER
Navigating the Web Browser Interface