Show Ipv6 Access-List - Digisol DG-FS4528P Management Manual

D
None
C
Extended IPv6 ACL
C
All new rules are appended to the end of the list.
E
This example accepts any incoming packets if the destination address is
2009:DB9:2229::79/8.
This allows packets to any destination address when the DSCP value is 5.
R
access-list ipv6 (657)
Time Range (504)
show ipv6 access-
This command displays the rules for configured IPv6 ACLs.
list
S
C
Privileged Exec
undefined fields. (The switch only checks the first 64 bits of the
destination address.)
prefix-length - A decimal value indicating how many contiguous bits
(from the left) of the address comprise the prefix; i.e., the network
portion of the address. (Range: 0-128 for source prefix, 0-8 for
destination prefix)
dscp – DSCP traffic class. (Range: 0-63)
time-range-name - Name of the time range.
(Range: 1-30 characters)
S
EFAULT ETTING
M
OMMAND ODE
U
OMMAND SAGE
XAMPLE
Console(config-ext-ipv6-acl)#permit 2009:DB9:2229::79/8
Console(config-ext-ipv6-acl)#
Console(config-ext-ipv6-acl)#permit any dscp 5
Console(config-ext-ipv6-acl)#
C
ELATED OMMANDS
YNTAX
show ipv6 access-list {standard | extended} [acl-name]
standard – Specifies a standard IPv6 ACL.
extended – Specifies an extended IPv6 ACL.
acl-name – Name of the ACL. (Maximum length: 16 characters)
M
OMMAND ODE
– 660 –
C 27 | Access Control Lists
HAPTER
IPv6 ACLs