Displaying The Arp Inspection Log; Table 16: Arp Inspection Log - Digisol DG-FS4528P Management Manual

D ARP
ISPLAYING THE
I L
NSPECTION OG
Figure 97: Configuring Interface Settings for ARP Inspection
Use the Security > ARP Inspection > Log Information page to show
information about entries stored in the log, including the associated VLAN,
port, and address components.
CLI R
EFERENCES
"show ip arp inspection log" on page 647
P
ARAMETERS
These parameters are displayed:

Table 16: ARP Inspection Log

Parameter
No.
VLAN
Port
Src. IP Address
Dst. IP Address
Src. MAC Address
Dst. MAC Address
W I
EB NTERFACE
To display the ARP Inspection log:
1. Click Security, ARP Inspection.
2. Select Configure Information from the Step list.
3. Select Show Log from the Step list.
– 230 –
C
HAPTER
Description
Log entry index number.
The VLAN where this packet was seen.
The port where this packet was seen.
The source IP address in the packet.
The destination IP address in the packet.
The source MAC address in the packet.
The destination MAC address in the packet.
7 | Security Measures
ARP Inspection