Initiating A Conference From The Contacts Screen - Huawei TP3106 User Manual

HUAWEI TP3106&TP3118&TP3118S
User Guide
----End

5.1.2 Initiating a Conference from the Contacts Screen

The contacts list stores site information. This saves time as you do not need to enter site
information every time you initiate a conference and prevents entry of incorrect IP addresses.
You can also search the Lightweight Directory Access Protocol (LDAP) server or eSpace
server for an LDAP site, eSpace site, or virtual conference room. This helps you quickly select
a site to initiate a conference.
Prerequisites
The touch panel has connected to the telepresence host.
The related site information has been saved to the contacts list of the telepresence host.
Context
Table 5-1
Table 5-1 Buttons on the contacts screen
Button
Issue 01 (2015-02-07)
NOTE
l To call into a favorite conference without setting the call parameters, tap that conference on the favorite
conferences screen.
l To search for a favorite conference, enter the conference name or any participant site name or number
and tap .
l If a favorite conference has only a single remote participant site, tap
type, call rate, and call type of that site. If a favorite conference has multiple remote participant sites,
tapping will display only the names and numbers of those sites.
describes the buttons on the contacts screen.
, , ,
, , ,
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Common site
These icons indicates that the site status is online, offline, busy,
and unknown, respectively.
Uni-screen Cisco TelePresence System site
This icon indicates that the site status is unknown.
Tri-screen Cisco TelePresence System site
This icon indicates that the site status is unknown.
Tri-screen telepresence site
These icons indicates that the site status is online, offline, busy,
and unknown, respectively.
5 Starting a Conference
to view the name, number,
28