Initiating A Conference From The Keypad Screen - Huawei TP3106 User Manual

HUAWEI TP3106&TP3118&TP3118S
User Guide
----End

5.1.3 Initiating a Conference from the Keypad Screen

Context
You can enter the IP address, number, or URI of a site from the keypad screen to initiate a point-
to-point conference. To set conference parameters, tap
Settings. For details about the conference parameters, see
Procedure
Step 1 From the Call screen, tap the Keypad tab.
Step 2 Enter the IP address or number of a site.
l To place a video call, tap the Video Call tab and enter the IP address or, if both the calling
l To place a voice call, tap the Voice Call tab and enter the phone number of the site to be
Step 3 Tap
----End
Issue 01 (2015-02-07)
NOTE
l To search for a site, group, LDAP site, eSpace site, or virtual conference room, enter the name or
number of the site, group, LDAP site, eSpace site, or virtual conference room in the search field, and
click .
l Click a letter in the A-Z column on the right pane to display the sites, groups, or virtual conference
rooms whose names start with the selected letter. Click # to display those whose names start with digits
or symbols.
l In the contacts list, tap
you can find the sites in the selected country, city, or area.
l On the Contacts tab, tap
transmission rate, and call type for the site entry.
and called party are registered with the gatekeeper (GK), number of the site to be called.
NOTE
Tap to display the full alphanumeric keypad. From this keypad, you can enter the IP address, site
number, or URI of the site you wish to call.
called. Voice calls are available only when a PSTN-E1 has been inserted to the telepresence
host.
NOTE
During a video conference, you can answer or place a public switched telephone network (PSTN) call.
When the call is set up, tap
Mixing On or Audio Mixing Off to start or stop mixing the voice transmitted through the PSTN line
into the conference audio. If you tap Audio Mixing On, other sites in the conference can hear audio
from the PSTN site.
to start the conference.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
and select a country, city, or area from the drop-down list box. Then,
next to a site entry. Then, you can view the site name, site number, data
on the task bar. In the displayed Voice Call dialog box, tap Audio
5 Starting a Conference
> Settings > General Conference
Table 3-3.
30