HUAWEI TP3106&TP3118&TP3118S
User Guide
3.6.2 Changing the Password
Context
From the touch panel, you can set the password required to access the Advanced Settings screen.
This password helps prevent unauthorized changes to telepresence conference parameters.
Procedure
Step 1 Tap
Step 2 In Current password, enter the current password. By default, the password is Change_Me.
Step 3 In New password and Confirm password, enter a new password.
Step 4 Tap Save.
----End
3.6.3 Viewing Telepresence System Information
From the touch panel, you can view the following information:
l
l
l
To view this information, tap
button to view the required information.
3.6.4 Setting General Conference Parameters
Context
Before placing calls, set general conference parameters.
Procedure
Step 1 Tap
Step 2 Set the parameters described in
Issue 01 (2015-02-07)
> Settings > Advanced Settings > Security Settings.
Site Capability: Displays the line types and maximum bandwidth supported by the
telepresence system and whether 4E1 connection is supported.
General Settings: Displays information about the system basics, codecs, and network
address book.
System Information: Displays the video protocol, video format, video bandwidth, video
frame rate, audio protocol, audio bandwidth, presentation protocol, presentation format,
presentation bandwidth, presentation frame rate, presentation type, encryption status, and
packet loss ratio of codecs.
> Settings > General Conference Settings.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
> Settings to display the Settings screen. Tap the related
Table
3-3.
3 Using the Touch Panel
21