9
STEP 1
STEP 2
STEP 1
141
Click Administration > Discovery - LLDP > LLDP Statistics.
For each port, the fields are displayed:
•
Interface—Identifier of interface.
•
Tx Frames Total—Number of transmitted frames.
•
Rx Frames
-
Total
—Number of received frames.
Discarded
-
—Total number of received frames that were discarded.
Errors
-
—Total number of received frames with errors.
•
Rx TLVs
Discarded
-
—Total number of received TLVs that were discarded.
Unrecognized
-
•
Neighbor's Information Deletion Count—Number of neighbor ageouts on
the interface.
Click Refresh to view the latest statistics.
LLDP Overloading
LLDP adds information as LLDP and LLDP-MED TLVs into the LLDP packets. LLDP
overload occurs when the total amount of information to be included in a LLDP
packet exceed the maximum PDU size supported by an interface.
The LLDP Overloading page displays the number of bytes of LLDP/LLDP-MED
information, the number of available bytes for additional LLDP information, and the
overloading status of every interface.
To view LLDP overloading information:
Click Administration > Discovery - LLDP > LLDP Overloading.
This page contains the following fields for each port:
•
Interface—Port identifier.
•
Total (Bytes)—Total number of bytes of LLDP information in each packet
Cisco 500 Series Stackable Managed Switch Administration Guide Release 1.3
—Total number of received TLVs that were unrecognized.
Administration: Discovery
Configuring LLDP