Adding Rules (Aces) For An Ipv6-Based Acl - Cisco SF500-24 Administration Manual

Access Control
IPv6-Based ACLs
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
Cisco 500 Series Stackable Managed Switch Administration Guide Release 1.3
ACLs are also used as the building elements of flow definitions for per-flow QoS
handling (see QoS Advanced
Defining an IPv6-based ACL
To define an IPv6-based ACL:
Click Access Control > IPv6-Based ACL.
This window contains the list of defined ACLs and their contents
Click Add.
Enter the name of a new ACL in the ACL Name field. The names are
case-sensitive.
Click Apply. The IPv6-based ACL is saved to the Running Configuration file.

Adding Rules (ACEs) for an IPv6-Based ACL

Click Access Control > IPv6-Based ACE.
This window contains the ACE (rules) for a specified ACL (group of rules).
Select an ACL, and click Go. All currently-defined IP ACEs for the selected ACL are
displayed.
Click Add.
Enter the parameters.
• ACL Name—Displays the name of the ACL to which an ACE is being added.
• Priority—Enter the priority. ACEs with higher priority are processed first.
• Action—Select the action assigned to the packet matching the ACE. The
options are as follows:
- Permit—Forward packets that meet the ACE criteria.
- Deny—Drop packets that meet the ACE criteria.
- Shutdown—Drop packets that meet the ACE criteria, and disable the
port to which the packets were addressed. Ports are reactivated from the
Port Management page.
Mode).
24
470