Cisco SF500-24 Administration Manual page 401

20
STEP 3
STEP 4
STEP 5
STEP 6
383
A caution message displays if you selected any other access profile, warning you
that, depending on the selected access profile, you might be disconnected from
the web-based configuration utility.
Click OK to select the active access profile or click Cancel to discontinue the
action.
Click Add to open the Add Access Profile page. The page allows you to configure
a new profile and one rule.
Enter the Access Profile Name. This name can contain up to 32 characters.
Enter the parameters.
• Rule Priority—Enter the rule priority. When the packet is matched to a rule,
user groups are either granted or denied access to the device. The rule
priority is essential to matching packets to rules, as packets are matched on
a first-match basis. One is the highest priority.
• Management Method—Select the management method for which the rule
is defined. The options are:
- All—Assigns all management methods to the rule.
- Telnet—Users requesting access to the device that meets the Telnet
access profile criteria are permitted or denied access.
- Secure Telnet (SSH)—Users requesting access to the device that meets
the SSH access profile criteria, are permitted or denied access.
- HTTP— Users requesting access to the device that meets the HTTP
access profile criteria, are permitted or denied.
- Secure HTTP (HTTPS)—Users requesting access to the device that
meets the HTTPS access profile criteria, are permitted or denied.
- SNMP—Users requesting access to the device that meets the SNMP
access profile criteria are permitted or denied.
• Action—Select the action attached to the rule. The options are:
- Permit—Permits access to the device if the user matches the settings in
the profile.
- Deny—Denies access to the device if the user matches the settings in
the profile.
• Applies to Interface—Select the interface attached to the rule. The options
are:
Cisco 500 Series Stackable Managed Switch Administration Guide Release 1.3
Defining Management Access Method
Security