Cisco SF500-24 Administration Manual page 107

6
STEP 1
STEP 2
89
There are cases when you might prefer to set the time of the reboot for some time
in the future. This could happen for example in one of the following cases:
• You are performing actions on a remote device, and these actions might
create loss of connectivity to the remote device. Pre-scheduling a reboot
restores the working configuration and enables restoring the connectivity to
the remote device. If these actions are successful, the delayed reboot can
be cancelled.
• Reloading the device cause loss of connectivity in the network, thus by
using delayed reboot, you can schedule the reboot to a time that is more
convenient for the users (e.g. late night).
To reboot the device:
Click Administration > Reboot.
Click one of the Reboot buttons to reboot the device.
• Reboot—Reboots the device. Since any unsaved information in the Running
Configuration is discarded when the device is rebooted, you must click Save
in the upper-right corner of any window to preserve current configuration
across the boot process. If the Save option is not displayed, the Running
Configuration matches the Startup Configuration and no action is necessary.
The following options are available:
- Immediate—Reboot immediately.
- Date—Enter the date (month/day) and time (hour and minutes) of the
schedule reboot. This schedules a reload of the software to take place
at the specified time (using a 24-hour clock). If you specify the month
and day, the reload is scheduled to take place at the specified time and
date. If you do not specify the month and day, the reload takes place at
the specified time on the current day (if the specified time is later than
the current time) or on the next day (if the specified time is earlier than
the current time). Specifying 00:00 schedules the reload for midnight.
The reload must take place within 24 days.
This option can only be used if the system time has either been set
NOTE
manually or by SNTP.
- In—Reboot within the specified number of hours and minutes. The
maximum amount of time that can pass is 24 days.
Cisco 500 Series Stackable Managed Switch Administration Guide Release 1.3
Administration: General Information
Rebooting the Device