Cisco SF500-24 Administration Manual page 331

17
STEP 1
STEP 2
313
To manually allocate a permanent IP address to a specific client:
Click IP Configuration > IPv4 Management and Interfaces > DHCP Server > Static
Hosts to display the Static Hosts page.
The static hosts are displayed.
To add a static host, click Add, and enter the fields:
• IP Address—Enter the IP address that was statically assigned to the host.
• Pool Name—Enter the host name, which can be a string of symbols and an
integer.
• Mask—Enter the static host's network mask.
- Network Mask—Check and enter the static host's network mask.
- Prefix Length—Check and enter the number of bits that comprise the
address prefix.
• Identifier Type—Set how to identify the specific static host.
- Client Identifier—Enter a unique identification of the client specified in
dotted hexadecimal notation, such as: 01b6.0819.6811.72.
or:
- MAC Address—Enter the MAC address of the client.
• Client Name—Enter the name of the static host, using a standard set of ASCII
characters. The client name must not include the domain name.
• Default Router IP Address (Option 3)— Enter the default router for the static
host.
• Domain Name Server IP Address (Option 6)—Select one of the devices DNS
servers (if already configured) or select Other and enter the IP address of
the DNS server available to the DHCP client.
• Domain Name (Option 15)—Enter the domain name for the static host.
• NetBIOS WINS Server (Option 44)— Enter the NetBIOS WINS name server
available to the static host.
• NetBIOS Node Type (Option 46)—Select how to resolve the NetBIOS name.
Valid node types are:
Cisco 500 Series Stackable Managed Switch Administration Guide Release 1.3
IP Configuration
DHCP Server