Cisco SF500-24 Administration Manual page 217

11
199
no_ip_phone
[no_ip_phone]
#macro description no ip_phone
#macro keywords $voice_vlan
#
#macro key description:
#
#Default Values are
#$voice_vlan = 1
#
smartport switchport trunk allowed vlan remove $voice_vlan
no smartport switchport trunk native vlan
smartport switchport trunk allowed vlan remove all
#
no port security
no port security mode
no port security max
#
no smartport storm-control broadcast enable
no smartport storm-control broadcast level
no smartport storm-control include-multicast
#
spanning-tree portfast auto
#
@
ip_phone_desktop
[ip_phone_desktop]
#macro description ip_phone_desktop
#macro keywords $native_vlan $voice_vlan $max_hosts
#
#macro key description:
configured on the port
#
#
the port
#Default Values are
#$native_vlan = Default VLAN
#$voice_vlan = 1
#$max_hosts = 10
#
#the default mode is trunk
smartport switchport trunk allowed vlan add $voice_vlan
smartport switchport trunk native vlan $native_vlan
#
port security max $max_hosts
port security mode max-addresses
port security discard trap 60
#
smartport storm-control broadcast level 10
smartport storm-control include-multicast
Cisco 500 Series Stackable Managed Switch Administration Guide Release 1.3
$voice_vlan: The voice VLAN ID
$native_vlan: The untag VLAN which will be
$voice_vlan: The voice VLAN ID
$max_hosts: The maximum number of allowed devices on
Smartport
Built-in Smartport Macros