Cisco SF500-24 Administration Manual page 461

23
443
- (Higher) Plaintext Only—Users are permitted to access sensitive data in
plaintext only. Users will also have read and write permission to SSD
parameters as well.
- (Highest) Both—Users have both encrypted and plaintext permissions
and are permitted to access sensitive data as encrypted and in
plaintext. Users will also have read and write permission to SSD
parameters as well.
Each management channel allows specific read permissions. The following
summarizes these.
Table 1 Read Permissions Allowed per Management Channel
Management Channel
Secure
Insecure
Secure XML SNMP
Insecure XML SNMP
• Default Read Mode—All default read modes are subjected to the read
permission of the rule. The following options exist, but some might be
rejected, depending on the read permission. If the user-defined read
permission for a user is Exclude (for example), and the default read mode is
Encrypted, the user-defined read permission prevails.
- Exclude—Do not allow reading sensitive data.
- Encrypted—Sensitive data is presented in encrypted form.
- Plaintext—Sensitive data is presented in plaintext form.
Each management channel allows specific read presumptions. The
following summarizes these.
Table 2 Default Read Modes for Read Permissions
Read Permission
Exclude
Encrypted Only
Plaintext Only
Cisco 500 Series Stackable Managed Switch Administration Guide Release 1.3
Security: Secure Sensitive Data Management
Read Permission Options Allowed
Both, Encrypted Only
Both, Encrypted Only
Exclude, Plaintext Only
Exclude, Plaintext Only
Default Read Mode Allowed
Exclude
*Encrypted
*Plaintext
SSD Rules