Lldp Overloading - Cisco 200 Series Administration Manual

Configuring Discovery
Configuring LLDP
STEP 2
STEP 1
STEP 2
Cisco Small Business 200 Series Smart Switch Administration Guide
Click Refresh to view the latest statistics.

LLDP Overloading

LLDP adds information to packets, and can create oversized packets. The
information that LLDP adds is divided into groups. The switch transmits the
maximum number of whole groups possible, meaning that no partial groups are
transmitted.
LLDP Overloading Page
The
bytes remaining to be sent for LLDP TLVs per port, and the port's transmission
status.
To view LLDP overloading information:
Click Administration > Discovery - LLDP > LLDP Overloading. The
Overloading Page
opens.
This page displays the following fields for each port:
• Interface—Port identifier.
• Total (Bytes)—Total number of bytes in each packet.
• Left to Send (Bytes)—Total number of bytes left to add into the packet.
• Status—Whether TLVs are being transmitted or if they are overloaded.
To view the overloading details for a port, select it and click Details. The LLDP
Overloading Details opens.
This page displays the following information for each TLV sent on the port:
• LLDP Mandatory TLVs
- Size (Bytes)—Total mandatory TLV byte size.
- Status—If the mandatory TLV group is being transmitted, or if the TLV
group was overloaded.
• LLDP MED Capabilities
- Size (Bytes)—Total LLDP MED capabilities packets byte size.
- Status—If the LLDP MED capabilities packets were sent, or if they were
overloaded.
displays the number of bytes sent and number of
7
LLDP
76