Status and Statistics
Viewing Etherlike Statistics
STEP 1
STEP 2
Cisco 500 Series Stackable Managed Switch Administration Guide Release 1.3
Click Status and Statistics > Etherlike.
Enter the parameters.
•
Interface—Select the type of interface and specific interface for which
Ethernet statistics are to be displayed.
•
Refresh Rate—Select the amount of time that passes before the Etherlike
statistics are refreshed.
The fields are displayed for the selected interface.
•
Frame Check Sequence (FCS) Errors—Received frames that failed the
CRC (cyclic redundancy checks).
•
Single Collision Frames—Frames that were involved in a single collision,
but were successfully transmitted.
•
Late Collisions—Collisions that have been detected after the first 512 bits
of data.
•
Excessive Collisions—Number of transmissions rejected due to excessive
collisions.
•
Oversize Packets—Packets greater than 2000 octets received.
•
Internal MAC Receive Errors—Frames rejected because of receiver errors.
•
Pause Frames Received—Received flow control pause frames.
•
Pause Frames Transmitted—Flow control pause frames transmitted from
the selected interface.
To clear statistics counters:
•
Click Clear Interface Counters to clear the selected interfaces counters.
•
Click View All Interfaces Statistics to see all ports on a single page.
2
14