Table of Contents
Advertisement
Chapter
4
Cleaning
6. Check the inline vaccum filter located between the Tamp and SLPA.
Replace if necessary.
7. If the vacuum has not improved and all pneumatic assemblies and tubing
are secure, replace the vacuum generator being careful to connect the air
lines to the proper fitting.
Cleaning Schedule
WARNING
All cleaning of printer/applicator parts should be done with isopropyl
alcohol and a non-metallic tool. Using any metallic tools can damage
machine parts, particularly the printhead and surrounding parts.
What follows is a guide for general day-to-day cleaning of the SLPA parts. To
keep the machine running smoothly, adhere to the following guidelines:
Items To Be
Serviced
Platen Rollers
Applicator Pad
Surface
Dynamic Brake
Air Jets
Air Filter/Regulator
Printhead Elements
48
Table 2. General Cleaning Schedule
Frequency
8 Hours or
Wipe with soft, lint-free cloth moistened with isopropyl
end of shift
alcohol.
8 Hours or
Wipe with soft, lint-free cloth moistened with isopropyl
end of shift
alcohol.
8 Hours or
Wipe with soft, lint-free cloth moistened with isopropyl
end of shift
alcohol.
Daily
Blow tube clear with filtering air if needed. Wipe with
soft, lint-free cloth moistened with isopropyl alcohol.
See "Positioning The Air Jets" on page 42.
Check daily
Replace filter. Wipe parts with clean cloth moistened
or as needed
with isopropyl alcohol.
Weekly or as
Wipe with a Printronix printhead cleaning pen or a
needed
cotton swab moistened with isopropyl alcohol.
See Figure 15 on page 44. Printhead cleaning needs
depend upon the print mode which is being used.
How To Clean
Advertisement
Table of Contents
