Conformance To Kc Standards; Conformance To Shipbuilding Standards; Software Licenses And Copyrights - Omron NX701-1620 User Manual

Regulations and Standards

Conformance to KC Standards

Observe the following precaution if you use NX-series Units in Korea.
Class A Device (Broadcasting Communications Device for Office Use)
This device obtained EMC registration for office use (Class A), and it is intended to be used in places
other than homes.
Sellers and/or users need to take note of this.

Conformance to Shipbuilding Standards

Some Database Connection CPU Units comply with shipbuilding standards. If you use a Database
Connection CPU Unit that complies with shipbuilding standards and the machinery or system in which
you use the Database Connection CPU Unit must also comply with the standards, consult with your
OMRON representative. Application conditions are defined according to the installation location.
Application may not be possible for some installation locations.
Usage Conditions for NK and LR Shipbuilding Standards
• The NJ-series Controller must be installed within a control panel.
• Gaps in the door to the control panel must be completely filled or covered with gaskets or other
material.
• The following noise filter must be connected to the power supply line.
Noise Filter
Manufacturer
Cosel Co., Ltd.

Software Licenses and Copyrights

This product incorporates certain third party software. The license and copyright information
associated with this software is available at http://www.fa.omron.co.jp/nj_info_e/.
18
Model
TAH-06-683
NJ/NX-series Database Connection CPU Units User's Manual (W527)