Sql Execution Failure Log; Overview; Application Procedure; Setting The Sql Execution Failure Log - Omron NX701-1620 User Manual

6 How to Use Operation Logs

6-4 SQL Execution Failure Log

This section describes the SQL Execution Failure Log used to trace the execution failures of the
DB Connection Service due to a DB-caused factor.
6-4-1

Overview

You can check the SQL statements and error information when transmission of an SQL
statement failed due to a problem* of the DB itself.
* For example,

Because the column names of the table have been changed, they do not match the column names of an
SQL statement sent from the DB Connection Service.

A value to insert is outside the valid range of the data type of the column.
You can record this log by setting SQL execution failure log to Record in the DB Connection
Service Setting of Sysmac Studio.
This log is saved as SQL Execution Failure Log files on the SD Memory Card mounted in the
CPU Unit. When no SD Memory Card is mounted in the CPU Unit, you cannot record the SQL
Execution Failure Log.
You can check the contents of this log in the SQL Execution Failure Log Tab Page of the
Operation Log Window in Sysmac Studio.
6-4-2

Application Procedure

Use the SQL Execution Failure Log according to the following procedure.
1. Set the SQL Execution Failure Log.
2. Check the SQL Execution Failure Log.
6-4-3

Setting the SQL Execution Failure Log

Double-click DB Connection Service Settings under Configurations and Setup - Host
Connection Settings - DB Connection in the Multiview Explorer. Then, set the following in the
Service Setting.
Item
SQL execution failure
log
Number of files
File size
6-18
Step
↓
Set whether to record the SQL Execution Failure Log.
Set the maximum number of files of the SQL Execution Failure
Log.
When the maximum number of files is reached, the oldest file is
deleted and a new file is created.
Set the maximum file size.
When the maximum file size is exceeded or when the number of
records exceeds 65,536 records in a file, a new file is created.
NJ/NX-series Database Connection CPU Units User's Manual (W527)
Reference
Refer to 6-4-3 Setting the SQL Execution Failure Log.
Refer to 6-6 Checking the Operation Logs.
Description Values
 Record
 Do not record
(Default)
2 to 100 files
(Default: 50)
1 to 100 MB
(Default: 10 MB)