Omron NX701-1620 User Manual page 168

7 Troubleshooting
Event name SQL Execution Failure Log Save Failed
Meaning Failed to save the SQL Execution Failure Log to the SD Memory Card.
Source PLC Function Module
Error attributes Level
Effects User program
System-defined Variable
variables
None
Cause and Assumed cause
correction
An SD Memory Card is not
inserted.
The SD Memory Card is not the
correct type of card.
The format of the SD Memory
Card is not correct.
The SD Memory Card is
write-protected.
The capacity of the SD Memory
Card is insufficient.
The SD Memory Card is
damaged.
Attached Attached information 1: Error Details
information 0001 hex: An SD Memory Card is not inserted.
0002 hex: The SD Memory Card is damaged, the format of the SD Memory Card is not correct, or the
0003 hex: The SD Memory Card is write-protected.
0005 hex: The capacity of the SD Memory Card is insufficient.
0302 hex: The SD Memory Card is damaged or failed to save a file to the SD Memory Card due to
Precautions/ You can change the error level to the observation.
Remarks
7-18
Source details
Minor fault Recovery
Continues. Operation
Data type
---
Correction
Insert an SD Memory Card.
Replace the SD Memory Card with
an SD or SDHC card.
Format the SD Memory Card with
Sysmac Studio.
Remove write protection from the
SD Memory Card.
Replace the SD Memory Card for
one with sufficient available space.
If none of the above causes
applies, replace the SD Memory
Card.
SD Memory Card is not the correct type of card.
other factors.
NJ/NX-series Database Connection CPU Units User's Manual (W527)
Event code 14D30000hex
DB Connection Detection
Service timing
Error reset Log category
Not affected.
Name
---
Prevention
Insert an SD Memory Card.
Use an SD or SDHC card.
Use a formatted SD Memory Card.
Also, do not remove the SD
Memory Card or turn OFF the
power supply while the SD BUSY
indicator is lit.
Make sure that the SD Memory
Card is not write-protected.
Use an SD Memory Card that has
sufficient available space.
Do not remove the SD Memory
Card or turn OFF the power supply
while the SD BUSY indicator is lit.
Do not remove the SD Memory
Card while the SD PWR indicator is
lit.
Replace the SD Memory Card
periodically according to the write
life of the SD Memory Card.
Continuously
System