Manual Structure; Page Structure - Omron NX701-1620 User Manual

Manual Structure

Page Structure

The following page structure is used in this manual.
Level 2 heading
Level 3 heading
A step in a procedure
Indicates a procedure.
Special information
Icons indicate
precautions, additional
information, or reference
information.
Manual name
NJ/NX-series Database Connection CPU Units User's Manual (W527)
4-3 Mounting Units
4-3-1 Connecting Controller Comp onents
Th e Units that make up an NJ-series Controlle r can be connected simply by pressing the Units together
and locking the sliders by moving them toward the back of the Uni ts. The End Cover is connected in the
sam e way to the Uni t on the far righ t side of the Con troller.
1
Join the U nits so that the c onne ctors fi t exactly.
2
Th e yellow slide rs at the top and bottom of each Uni t lo ck the Units together. Move the slide rs
toward the ba ck of the Uni ts as sh own bel ow un til they click into place.
Preca ution s for Cor rec t Use Preca ution s for Cor rec t Use
The sliders on the tops and bottoms of the Power Supply Unit, CPU Unit, I/O Units, Special I/O
Units, and CPU Bus Units must be completely locked (until they click into place) after connecting
the adjacent Unit connectors.
NJ-seriesCPU Unit Ha rdware User ' s Ma nual (W500)
This illustration is provided only as a sample. It may not literally appear in this manual.
4 Installation and Wi ring
Hook
Hook holes
Connector
Move the sliders t oward the ba c k
until th ey lock into plac e .
Lock
Release
Slider
Manual Structure
Level 1 heading
Level 2 heading
Level 3 heading
Gives the current
headings.
Page tab
4
Gives the number
of the main section.
4-9
3