1. Unclip and slide the top of the
center console (including the cup
holders) back slightly. (Figure A)
2. Open the passenger door, and then
unclip and remove the dashboard
trim panel. Remove (1) Phillips
screw exposed. (Figure B)
3. Unclip and remove the entire panel
that is above the glove box, and
below the radio. (Figure C)
4. Remove (2) Phillips screws from
the radio/vent panel, and then
unclip and remove. (Figure D)
5. Remove (4) Phillips screws
securing the radio, and then
unplug and remove.
Continue to Kit Preparation
Dash Disassembly
(Figure A)
(Figure B)
95-7378B
(Figure C)
(Figure D)
2