Download  Print this page

Metra Electronics 95-7323 Installation Instructions Manual

Car radio kit
Hide thumbs
   

Advertisement

INSTALLATION INSTRUCTIONS FOR PART 95-7323
Hyundai Entourage 2007-2008
KIT FEATURES
• Double DIN radio provision
• Stacked ISO units provision
KIT COMPONENTS
A) • Double DIN Trim Plate B) • Double DIN Brackets
A
WIRING & ANTENNA CONNECTIONS (Sold Separately)
Wiring Harness:
• 70-1004 Hyundai/Kia harness 2004-up
Antenna Adapter:
• Not Required
Panel Removal Tool • Phillips Screwdriver • Small Flat Blade Screwdriver
APPLICATIONS
Kia Sedona 2006-up
95-7323
TOOLS REQUIRED
METRA. THE WORLD'S BEST KITS.™
1-800-221-0932
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
B
metraonline.com

Advertisement

Table of Contents
loading

  Related Manuals for Metra Electronics 95-7323

  Summary of Contents for Metra Electronics 95-7323

  • Page 1 INSTALLATION INSTRUCTIONS FOR PART 95-7323 Hyundai Entourage 2007-2008 Kia Sedona 2006-up KIT FEATURES • Double DIN radio provision • Stacked ISO units provision KIT COMPONENTS A) • Double DIN Trim Plate B) • Double DIN Brackets WIRING & ANTENNA CONNECTIONS (Sold Separately) Wiring Harness: •...
  • Page 2 All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition. *NOTE: Refer also to the instructions included with the aftermarket radio. 95-7323 NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.
  • Page 3: Dash Disassembly

    3. Unclip and remove entire panel surrounding radio including the clock and a/c vents. (Figure C) 4. Remove (4) Phillips screws securing radio. 5. Unplug and remove the radio. Continue to kit assembly 95-7323 (Figure A) (Figure B) (Figure C)
  • Page 4: Double Din Radio Provision

    Kit Assembly 95-7323 Double DIN radio provision 1. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 2. Snap the Double DIN brackets to the inside edge of the Double DIN trim plate.
  • Page 5 Kit Assembly 95-7323 Stacked ISO units head provision 1. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.
  • Page 6 Notes...
  • Page 7 Notes...
  • Page 8 INSTALLATION INSTRUCTIONS FOR PART 95-7323 METRA. THE WORLD’S BEST KITS.™ metraonline.com 1-800-221-0932 © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION...