Advertisement
Available languages
Available languages
KIT COMPONENTS
• A) Radio housing • B) Radio brackets • C) #8 x 3/8" Phillips screws (4)
A
Metra. The World's Best Kits.
®
Hyundai
Santa Fe 2013-2016, Santa Fe Sport
Santa Fe Sport
(for non-NAV vehicles only)
MetraOnline.com
Visit
specific applications
KIT FEATURES
• ISO DDIN radio provision
• Painted matte black
B
MetraOnline.com
2017-2018
(without 7" screen)
for more detailed information about the product and up-to-date vehicle
C
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
95-7354B
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly ..................................................2
2014-2016
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: Please visit metraonline.com
for wiring harness options
Antenna Adapter: Please visit metraonline.com
for antenna adapter options
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
Attention!
With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
REV. 7/15/22 INST95-7354B
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Metra Electronics 95-7354B
Summary of Contents for Metra Electronics 95-7354B
- Page 1 Ensure that all installation connections are secure before cycling the ignition to test this product. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 7/15/22 INST95-7354B...
-
Page 2: Dash Disassembly
DASH DISASSEMBLY 1. Unclip and remove the A/C vents from the left and right side of the factory radio. (Figure A) 2. Remove (4) Phillips screws securing the radio. Slide the radio out, then unplug and remove the radio. (Figure B) Continue to Kit Assembly (Figure A) (Figure B) -
Page 3: Kit Assembly
KIT ASSEMBLY 1. Secure the radio brackets to the radio housing with the (4) #8 x 3/8” Phillips screws provided. (Figure A) 2. Slide the radio into the bracket/housing assembly, then secure it using the screws supplied with the radio. (Figure B) 3. - Page 4 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 7/15/22 INST95-7354B...
- Page 5 Al probar el equipo del mercado de accesorios, asegúrese de que todo el equipo de fábrica esté conectado antes de encender el llave de encendido. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 7/15/22 INST99-7354B...
-
Page 6: Desmontaje Del Tablero
DESMONTAJE DEL TABLERO 1. Desenganche y quite las rejillas del aire acondicionado del lado izquierdo y derecho del radio de fábrica. (Figura A) 2. Quite los (4) tornillos Phillips que sujetan el radio. Deslice la radio, luego desenchufe y quite la radio. (Figura B) Continúe con Ensamble del Kit (Figura A) (Figura B) -
Page 7: Ensamble Del Kit
ENSAMBLE DEL KIT 1. Sujete los soportes de radio en la carcasa del radio con los (4) tornillos Phillips #8 x 3/8”. (Figura A) 2. Sujete la cavidad en el ensamble de la soporte/carcasa del radio usando los (4) tornillos Phillips de cabeza troncocónica #8 suministrados. - Page 8 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recomienda MECP técnicos certificados Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 7/15/22 INST99-7354B...
Need help?
Do you have a question about the 95-7354B and is the answer not in the manual?
Questions and answers