Technical Specifications; Power Supply Specifications; Poe Power Supply Specifications - Siemens RUGGEDCOM RSG920P Installation Manual

RUGGEDCOM RSG920P
Installation Guide

Technical Specifications

The following sections provide important technical specifications related to the device:
• Section 4.1, "Power Supply Specifications"
• Section 4.2, "PoE Power Supply Specifications"
• Section 4.3, "Failsafe Alarm Relay Specifications"
• Section 4.4, "Copper Ethernet Port Specifications"
• Section 4.5, "SFP Optic Ethernet Port Specifications"
• Section 4.6, "Digital Input Specifications"
• Section 4.7, "Operating Environment"
• Section 4.8, "Mechanical Specifications"
Section 4.1

Power Supply Specifications

Power Supply Type
HI
LO
a
(T) denotes time-delay fuse.
b
Power consumption varies based on configuration.
Section 4.2

PoE Power Supply Specifications

The RUGGEDCOM RSG920P adheres to the following power output and IEEE specifications depending on the
input voltage supplied to the device.
Voltage Range
51-57 VDC
45-57 VDC
Power Supply Specifications
Input Range
Minimum Maximum
98 VDC 300 VDC
88 VAC 264 VAC
9 VDC 60 VDC
Power In
Internal Fuse Rating
3.15 A Maximum
Internal
Isolation
a
Fuse Rating
3.15 A(T) 2.8 kVAC
5 A 1.5 kVDC
Power Out
50-57 VDC, 30 W per Port Maximum (IEEE 302.at)
44-57 VDC, 15 W per Port Maximum (IEEE 302.af)
Chapter 4
Technical Specifications
Maximum Power
b
Consumption
27 W
25