Mounting The Device To A Panel - Siemens RUGGEDCOM RSG920P Installation Manual

Chapter 2
Installing the Device
Figure 3: DIN Rail Mounting
1. DIN Rail 2. DIN Rail Bracket
3. Pull the release on the bracket down and slide the device onto the DIN rail. Let go of the release to lock the
device in position.
Section 2.2.2

Mounting the Device to a Panel

For panel installations, the RUGGEDCOM RSG920P can be equipped with panel adapters that allow the device
to be attached to a panel in multiple orientations.
NOTE
A side mount orientation requires additional adapters.
Figure 4: Panel Mount Options
1. Rear Mount Orientation
8
1
1
2. Front Mount Orientation 3. Side Mount Orientation
1
2
2
RUGGEDCOM RSG920P
Installation Guide
3
Mounting the Device to a Panel