Menu Structures And Parameter Descriptions - Rice Lake 420 Plus Installation Manual

To select a parameter, press
right until the desired menu group appears on the
display, then press to move down to the submenu or
parameter you want. When moving through the menu
parameters, the default or previously selected value
appears first on the display.
To change a parameter value, scroll left or right to
view the values for that parameter. When the desired
value appears on the display, press
value and move back up one level. To edit numerical
values, use the navigation keys to select the digit and
to increment or decrement the value or use the
numeric keypad. (see Figure 3-4).
3.2

Menu Structures and Parameter Descriptions

The following sections provide graphic representations of the
structure, the settings you choose under each parameter are arranged horizontally. To save page space, menu
choices are shown in vertical columns. The factory default setting appears at the top of each column in bold type.
Most menu diagrams are accompanied by a table that describes all parameters and parameter values associated
with that menu. Default parameter values are shown in bold type.
16 420 Plus Installation Manual
or to scroll left or
to select the
When editing numeric values, press
digit selected. Press or to increment or decrement the
value of the selected digit, or use the numeric keypad.
Press to save the value entered and return to the level above.
Figure 3-4. Editing Procedure for Numeric Values
420 Plus menu structures. In the actual menu
or to change the