Getting Your Messages; Screening Your Calls - Uniden XDECT SSE45 Owner's Manual

Getting Your Messages

To..
play new messages
restart this message
replay an earlier
messages
skip a message
slow down message
playback
delete a message
delete all messages
play old messages
stop playback

Screening Your Calls

You can use the answering system for call screening. While the system takes a
message, you can listen on the base speaker (if you turn on Call Screen) or from a
handset. Only one handset can screen calls at a time. If another handset tries to screen
the call, an error tone will sound, a message, "Unavailable at this time", will be displayed
on the screen and the handset returns to standby.
To...
turn on Call Screen
hear the caller leaving
a message
answer the call
mute the call screen
without answering
From the Base
Press PLAY/STOP.
The system announces the number of new and old messages,
then plays each new message (followed by the day and time if
set) in the order it was received.
Wait at least 5 seconds after the message starts playing,
Press REPEAT.
Within 2 seconds after a message starts playing,
Press REPEAT.
Press SKIP.
Press SLOW.
Press again to return to
normal playback speed.
While the message is playing,
press DELETE.
With the phone in standby,
press DELETE; press DELETE
again to confirm.
After the system plays the new messages,
press PLAY/STOP again.
Press PLAY/STOP.
From the Base
Not Available.
Just listen to the caller
over the speaker.
Not available
Press PLAY/STOP.
From the Handset
Press MENU/OK, then select
Messages/Play Messages.
Select 1:Repeat.
Select 1:Repeat.
Select 3: Skip.
Press SLOW.
Press again to return to
normal playback speed.
select 4:Delete
Not available.
select 2:Play.
Select 5:Stop.
From the Handset
Press MENU/OK then select Answering
Setup/Call Screen menu. Turn Call
Screen on or off.
Press MENU/OK.
Press TALK/FLASH.
Press END/CLEAR or return the handset
to the cradle.
29