Related Manuals for Uniden XDECT R003
Summary of Contents for Uniden XDECT R003
- Page 1 XDECT R003 Bluetooth ® For more exciting new products please visit our website: Australia: www.uniden.com.au New Zealand: www.uniden.co.nz...
-
Page 2: Important Safety Instructions
If any items are missing or damaged, contact your place of purchase. Never use damaged products! Need Help? Get answers at our website: www.uniden.com.au for Australian model or www.uniden.co.nz for New Zealand model. Important Safety Instructions! When using your telephone equipment, basic safety precautions should always be... -
Page 3: Setting Up Your Handset
Setting Up Your Handset Install the Battery 1. Unpack the handset, battery pack, and battery cover. If the battery cover is already on the handset, press in on the notch and slide the cover down and off. 2. Line up the battery pack connector with the jack inside the handset. -
Page 4: Registering The Handset
Repeater/ charger. You can use the handset normally even if the charger is not registered. Compatible Bases This handset is designed for use with Uniden's XDECT R035BT base. For the most up-to-date list of compatible bases for this handset, see our website. -
Page 5: How It Works
Using the Repeater/Charger How it Works The XDECT R003BT repeater/charger extends the range of your base in all directions, including up and down. Each handset will automatically connect to the repeater/charger or the base, depending on which signal is stronger. (The handset operates exactly the same way whether it's connected to the base or to the repeater/charger.) Base Coverage Area... - Page 6 Registering the Repeater/charger Registering the Repeater/charger is a separate process from registering the handset. You can use the charger even if the handset is not registered. 1. On the base, when the phone is in standby, press and hold FIND until you hear a long beep from the base and the light starts flashing.
- Page 7 Picking the best spot The best spot for the repeater/ charger is as far from the base as possible while still maintaining a good signal, or near the edge of the base’s coverage area. To find the edge of the coverage area: 1.
- Page 8 Wall Mounting the Repeater/charger If you want mount the charger on the wall, you need to adjust the desk stand: 1. Pull the locking tab up and back (see the black arrow in the illustration to the right), and slide the desk stand straight off.
-
Page 9: Handling Liquid Damage
Important Information Handling Liquid Damage Moisture and liquid can damage your cordless phone. If the handset or repeater/charger is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off the liquid, and use as normal. ... -
Page 10: Battery Information
Please refer to our Uniden website for any details or warranty durations offered in addition to those contained below. Warrantor The warrantor is either Uniden Australia Pty Limited ABN 58 001 865 498 (“Uniden Aust”) or Uniden New Zealand Limited (“Uniden NZ”) as the case may be. - Page 11 Product first purchased either in Australia or New Zealand and will expire one (1) year from the date of the original retail sale. If a warranty claim is made, this warranty will not apply if the Product is found by Uniden to be: (A) Damaged or not maintained in a reasonable manner or as recommended in the relevant Uniden Owner’s Manual;...
- Page 12 © 2011 Uniden Australia Pty Ltd/Uniden New Zealand Limited Printed in Vietnam UUZZ01233BB(0)
Need help?
Do you have a question about the XDECT R003 and is the answer not in the manual?
Questions and answers