Using Multi-Handset Features - Uniden XDECT SSE45 Owner's Manual

Xdect sse45 series digital cordless phones
Table of Contents

Advertisement

2. Select the option, Create New. You will be given the option to enter a name, press
MENU/OK after you have finished doing so.
3. Next, enter the desired number (along with the area code, where necessary) and
press MENU/OK to save.
Under the Call Blocking menu, use the following options:
View Number to view all the numbers that have been blocked.
Private Number, to block all calls from private numbers.
Unknown Number, to block all calls from unknown numbers.

Using Multi-Handset Features

# To use the features in this section, you need at least 2 handsets.
Expanding Your Phone
• Your base supports a total of 6 cordless handsets, including any that came with your
phone.
• You must register accessory handsets to the base before using them. Handsets that
aren't registered display a "not registered" message. For registration instructions,
see page 34 or the accessory handset manual.
Using Conference Calling
• When an outside call comes in, two handsets can join in a conference call with the
outside caller.
• To join the call, just press TALK/FLASH. To leave the conference call, hang up normally;
the other handset remains connected to the call.
Using Privacy Mode
• To activate Privacy Mode on a call in progress, press MENU/OK, select Call Privacy Off
and press MENU/OK. As long as privacy mode is on, no other handsets can join your
call.
• Privacy Mode turns off automatically when you hang up or put the call on hold; to
turn it off press MENU/OK, select Call Privacy On and press MENU/OK.
24

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents