Related Manuals for Uniden XDECT 8005WP Series
Summary of Contents for Uniden XDECT 8005WP Series
- Page 1 XDECT 8005WP Series For more exciting new products please visit our website: Australia: www.uniden.com.au New Zealand: www.uniden.co.nz...
-
Page 2: Important Safety Instructions
Important Safety Instructions! When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: • The charger is NOT waterproof: Do not use or place the charger near water (e.g., near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool). -
Page 3: What's In The Box
• Need Help? Get answers at our website: www.uniden.com.au for Australian model www.uniden.co.nz for New Zealand model. Understanding the Waterproof Handset The handset complies with JIS7 water submersion specifications. It can remain submerged under 1m of water for up to 30 minutes without damage or loss of functionality. -
Page 4: Installing Your Phone
Installing Your Phone Charge the Battery The handset's rechargeable battery is already installed. Before you can charge the battery, you have to power it on. Remove the cardboard spacer. Press the power on/off (activation) pin according to the directions on the label. Remove the label once the handset is powered on. -
Page 5: Installing The Beltclip
Place the handset in the charger with the display facing forward. The display on the handset should turn on. If... Try... the handset display - Checking the AC adaptor connection. does not turn on - Seeing if the outlet is controlled by a wall switch. -
Page 6: Registering To A Base
The accessory handset won't work until you register it to a base! Compatible Bases This handset is designed for use with Uniden's XDECT 8015, XDECT 8015WP and XDECT 8055 bases. Other Uniden XDECT bases may be compatible with this handset. Some features may not be available when using the XDECT 8005WP with these other models. -
Page 7: Test The Connection
Test the connection Pick up the handset and press TALK/FLASH. Make sure you get a dial tone. (Press END to hang up.) If... Try... - you don't hear a dial tone Making sure the handset is fully charged, then trying again. - the display says Registration failed Resetting the Handset... -
Page 8: Specifications
All features and operation for the handset are described in the owner’s manual for one of the bases listed under the Compatible Bases section. • Owner’s manuals for all Uniden phones are available on our website for free downloading. Specifications Part number... -
Page 9: Battery Information
Using another charger may damage the battery or cause it to explode. Rechargeable batteries must be recycled or disposed of properly. Uniden works to reduce lead content in PVC coated cords in our products & accessories. -
Page 10: One Year Limited Warranty
One Year Limited Warranty UNIDEN XDECT 8005WP IMPORTANT: Satisfactory evidence of the original purchase is required for warranty service Please refer to our Uniden website for any details or warranty durations offered in addition to those contained below. Warrantor The warrantor is either;... - Page 11 Product does not conform with this warranty, you should deliver the Product, together with satisfactory evidence of your original purchase (such as a legible copy of the sales docket) to Uniden at the addresses shown below. You should contact Uniden regarding any compensation that may be payable for your expenses incurred in making a warranty claim.
- Page 12 © 2011 Uniden Australia Pty/Uniden New Zealand Limited Printed in Vietnam U01UU257BZZ(0)