Using Caller Announce; Call Blocking - Uniden XDECT SSE45 Owner's Manual

• With the phone in standby, press and hold MUTE/DND on the base. The phone
automatically turns on the answering system and shows DND Mode On in the
display on each handset. (The answering system answers any incoming calls without
playing anything through the speaker.)
• You can also press and hold #/DND on the handset. The DND Mode menu displays.
You can choose to have DND mode always on or select a duration from 1 - 9 hours.
• To cancel, press MUTE/DND or #/DND again.
# If you turn the answering system off while DND mode is on, the phone turns off
DND mode.

Using Caller Announce

With the Caller Announce feature, you can turn on Text-To-Speech so your phone can
announce names in different situations.
• You have to turn on Caller Announce separately for each handset (see page 14).
• To change the volume of CID announcements, change the ringer volume. To
change the volume for all Caller Announce features, change the speaker volume.
• To make sure it doesn't interrupt a call or an intercom page, the phone only uses
Caller Announce when it starts out in standby.
• It takes at least 2 rings for the phone to receive CID information and announce it. If
the phone is answered before the end of the second ring, the phone won't announce
the name of the caller.
Setting Caller Announce
1. Press MENU/OK and scroll to Handset Setup. Press MENU/OK to select it.
2. Scroll to Caller Announce; press MENU/OK to select it.
3. Select On or Off and then press MENU/OK to select it

Call Blocking

If you subscribe to Caller ID, you can save phone numbers to the call block list. When a
call comes in, the phone compares the received phone number to the numbers on the
call block list. If the phone number is on the list, the phone replaces the caller's name
with Call Blocked and blocks the call.
The call block list holds 20 entries, and all handsets share the same list. You can add
entries by selecting Add Call Block in the CID menu that displays after you have viewed
the CID record or through the Call Blocking menu (see below). (Only one handset can
edit the call block list at a time.)
With the Call Block PRO feature, you can register individual contact numbers or even
certain digits, to block calls from those numbers. For example, if you register "02 9597
9" then all calls from contact numbers beginning with "02 9597 9" will be blocked. If
you register "02 9597 9xxx" then all calls from that particular contact number will be
blocked.
1. In standby, press MENU/OK and scroll down to select the option Call Blocking.
The following four options are displayed; View Number, Create New,
Private Number and Unknown Number.
23