Table of Contents
Advertisement
UP308BH (DSS2465) ENG OM
1/14/05
TURNING THE ANSWERING SYSTEM ON/OFF
1) To turn the answering system On, press
After the announcement "Answering System is on", the current greeting message will
be played and you will hear a confirmation tone. The message counter displays the
• When the answering
system is full, "
"
number of messages stored in memory. If the display flashes, then there are new
appears on the base.
messages waiting for you.
You should delete
2) To turn the answering system Off, press
some messages so
"Answering System is off", the message counter display will no longer be illuminated.
that the system can
record new messages.
You can also turn the Answering System On or Off from the handset using the menu
mode (see page 20).
SETTING UP YOUR ANSWERING SYSTEM
Setting your outgoing message (Greeting)
When you receive a call, the answering system automatically plays either the
• Position yourself as
near to the base as
pre-recorded message or your own greeting.
possible and speak
Pre-recorded message
clearly when
recording your
The following message is pre-recorded:
outgoing message.
"Hello, no one is available to take your call. Please leave a message after the tone."
• If you make an
outside call, or a call
Recording a personal outgoing message (Greeting)
is received on this
You can record a greeting up to 30 seconds long (must be more than 2 seconds long).
base during the
operation, the
1) When the phone is in the standby mode, press and hold
operation is canceled.
2) Start your recording after the announcement "Record greeting".
The message counter displays "
3) When you have finished recording your greeting, press
You will hear a confirmation tone and your recorded greeting plays back for you.
[ 42 ]
11:47 AM
Page 42
", then begins to count down.
Get other manuals https://www.bkmanuals.com
in the standby mode.
. After the announcement
.
,
or
.
Advertisement
Table of Contents
