Using The Answering System; Setting Up Your Answering System - Uniden XDECT R055 Owner's Manual

Using the answering System

Each line has a separate answering system. Whenever you access
the answering system, the phone prompts you to choose a line.
After that, any settings or operations will affect only the answering
system for that line. For example, deleting all the messages from the
answering system from line 1 does not affect any messages on the
answering system for line 2.

Setting Up Your answering System

Recording your outgoing message
Your personal outgoing message or greeting can be between 2
seconds and 30 seconds long. If you don't want to record an outgoing
message, the system will use its pre-recorded greeting:
Hello, no one is available to take your call. Please leave a
message after the tone.
To record your greeting:
1. Open the menu and select
Line 1 or Line 2, then select Record Greeting.
2. Select
3. Press START
then and begin your recording.
4. When you're finished, press
new greeting.
5. To keep this greeting, press
press
DELETE
Switch between the pre-recorded greeting and your greeting
1. Open the menu and select
Line 1 or Line 2, then select Greeting Options.
2. Select
3. The system plays back the current greeting (personal or pre-
recorded) for this line. Press
keep the current greeting.
40
. Wait for the system to say "Record greeting" and
.
Ans. Setup.
STOP . The system plays back your
OK again. To delete it and try again,
Ans. Setup.
CHANgE to switch greetings or OK to