System Overview; Introduction - Menvier Security TS690 Operator's Manual

System Overview

Introduction

The TS690 and TS690ID are advanced security alarm control systems using state of the art
electronics to provide comprehensive but flexible protection for both domestic and
commercial premises. The system comprises of a number of components linked to a
central control unit which is concealed from view but accessible for maintenance. The
TS690 can monitor from 6 to 14 detection circuits whereas the TS690ID can monitor from 2
to 38 detection circuits.
Both systems can be operated from up to four remote keypads which may be one of four
types. Detection devices such as door contacts or movement sensors are allocated to
detection circuits which are identified on the remote keypad displays.
A modem can also be connected to the alarm system via the telephone line to allow
remote interrogation, programming and resetting of alarms. This feature is known as
"Downloading" and is normally performed by the installation company or central station.
Each alarm installation is specific to the site and its occupier and may differ from other
TS690/TS690ID installations. This manual describes in detail all the functions and
procedures available to the user, however, not all these may be relevant to the way your
system is set up. To avoid unnecessary operating errors please discuss the details of the
alarm system with your installation company before attempting to use it. Also ensure that
installation company complete the system record sheets at the back of this manual.
3