Table of Contents
Advertisement
Eccentric crank
The tricycle can be fitted with an eccentric
crank on the left and/or right side. The
illustration may differ from your crank,
because it is custom made.
Foot support
When using the foot support you can fix your
foot by sliding the two straps [A] in the quick
releases [B].
The quick release can be unlocked by pulling
the lip to the rear. Now the strap can be pulled
out.
You can cut the straps to size. The strap
should retain a length of at least five
centimetre.
The position of the foot support on the pedal is
adjustable in length. This allows you to pedal with
the ball of your foot for better thrust.
1. Slightly loosen the four nuts with a socket
wrench.
2. Slide the plate included the foot support
forwards or backwards into the desired
position. Then tighten the nuts again.
User manual
Tricycles 17.04
[B]
1.
[A]
2.
24
Advertisement
Table of Contents
