Table of Contents
Advertisement
Intergrated lighting contol
The tricycle can be fitted with a different
headlight. This lighting is connected to the
electrical system.
Adjust the angle of the headlamp. Make sure
that the centre of the beam is approximately
ten meters in front of the bike.
The headlight switches automatically on when
the electrical system is activated. You can
manually activate and deactivate the lights
with a short press of the on/off button on the
display. If the electrical system is switched off,
the lighting turns off automatically.
Once the battery is low, the motor will no longer provide support for cycling. The
integrated lighting continues to work. However on the remaining charge.
The USB port, which is located on the headlight, has no function.
Flashing light system
To use the flashing lights press the switch [A]
to the left or right.
To turn off the indicators, move the switch to
the centre position.
The lights work on a battery.
To replace the batteries, turn the screw on the
cap and take the orange cap [B] away. Then
remove the PCB [C] from the holder. You can
now replace the battery [D] .
This is a 3-volt lithium battery, CR123A.
Batteries cause environmental
pollution. Follow the local regulations
during disposal.
Extra accessories are available at your dealer.
User manual
Tricycles 17.04
[A]
[C]
[D]
[B]
30
Advertisement
Table of Contents
