Accessories - Vanraam Husky User Manual

Hide thumbs Also See for Husky:
Table of Contents

Advertisement

1.
The system is in temperature-protection. You can continue cycling with
reduced support.
2.
After cooling down, the normal support and indication will restore
automatically.
If the support LED lights on the display are flashing:
This indicates motor failure. You will need to contact your dealer.
If a red LED light on the charger starts flashing, remove the plug form the mains
outlet and do not longer use the charger. In this case, contact your dealer.

Accessories

Depending on your order, you can use the accessories as described below.
Push bar
(Husky, Mini, Midi)
To fit the push bar:
1. Loosen the screw by using an Allen key.
2. Slide the push bar in the tube up to the
stop. Then tighten the screw again very
firmly by using the Allen key.
Crank shortener
The crank shortener is fitted to the
crank, as illustrated. The pedal can
then be fitted into the crank shortener
at two positions.
With the Allen screw [A] the crank
shortener should be aligned with the
crank.
User manual
Tricycles 17.04
[A]
Two assembly points pedal
1.
2.
23

Advertisement

Table of Contents
loading

Table of Contents