Safety Measures - Vanraam Husky User Manual

Hide thumbs Also See for Husky:
Table of Contents

Advertisement

Safety measures

Ensure the tricycle is in good condition each time before using it. Check
before each ride that the brakes are in order. Check the lighting and make
sure there is enough tyre pressure.
Regularly check if the wheels, the handlebars and the saddle are properly
fixed and also whether all screw joints are tight.
Only use the tricycle on a solid and level surface.
Make sure that wide trousers or lose hanging clothing don't get caught in the
chain, spokes or pedals.
Do not use a pressure washer or a steam cleaner for the cleaning of the
tricycle.
Block the tricycle to stop it from moving when you are getting on or off the
tricycle. Do this by using the parking brake and holding the tricycle.
Always lock the tricycle when leaving it unattended.
Make sure that no dangerous speed develops when driving downhill and
entering tunnels. Brake on time and don't ride faster than 30 kilometres per
hour.
In case of pregnancy, extra care is required owing to a higher risk of injury.
Do not put the tricycle in direct sunlight: the temperature of some parts could
reach above 41ºC resulting in possible hypersensitivity of the skin.
In case that the tricycle is equipped with the Silent electric motor system,
make sure that you get used to riding with electric support. Beware when
you turn on the system and make sure you don't get startled by unexpected
behaviour because you turned on the electric support. Practice the reverse
function! Please be careful not to switch on the reverse function of the
electric motor inadvertently.
Extra attention is essential if a child is using the tricycle!
Never leave a child alone with the tricycle without supervision!
Always have the child wear a tricycle helmet! Make sure the helmet fits
correctly!
User manual
Tricycles 17.04
3

Advertisement

Table of Contents
loading

Table of Contents