Vanraam Husky User Manual page 35

Adjusting chain tension
(Viktoria, Viktor)
To keep the chain tension correct, the back
wheel axle is adjusted. Follow the instructions
below:
1. Slightly loosen the nuts of the back wheel
axle, so that the back wheel can move
backwards and forwards.
2. Slide the back wheel backwards, so that
the chain is hanging loose, as described
earlier. Also slide the bracket (A).
3. At the same time make sure that the wheel
is straight and positioned in the centre of
the frame, as illustrated. Not to the left or
to the right.
4. Slightly tighten the nuts.
5. Check whether the chain tension is correct
and whether the wheel is straight and in
the centre of the frame.
6. Tighten the nuts again.
User manual
Tricycles 17.04
[A]
1.
3.
3.
2.
1.
34